1 cut ft whole house back-washable sediment filter.
$1,425.60 C$
1 cut ft whole house back-washable sediment filter.
1 cut ft whole house back-washable sediment filter
Excessive dirt and sediment can cause the need for frequent replacement of cartridge filters
Backwashes automatically using only water – no salt or chemicals needed
Virtually maintenance free
3/4″ NPT Inlet/Outlet
1 cubic foot backwash sediment filter, 3/4″ bypass, 3/4″ NPT yoke, 1/2″ drain fitting, installation instructions.
Whole House Backwashable sediment filter EBWFE
Excessive dirt, silt, particulate matter, etc can be a major problem in domestic use. Turbid water is not only unpleasant to look at, it can be unsafe to drink. Drinking water regulations require the water to have turbidity less than 1 NTU, above which it is considered unsafe for drinking. Further, particulates causing turbidity can result in malfunction of pumps, pressure tanks, plumbing fixtures, etc. Further, washing machines and dishwashers cannot operate with dirty turbid water.
While cartridge filters are used to filter low to medium amounts of dirt, excessively high loads of dirt can plug them up in a short period of time, leading to increased costs of replacement and downtime.
Where excessive dirt conditions exist, Rainfresh EBWFE automatic backwashable filters provide excellent turbidity reduction without the need to change filters. These filters consist of a processed and graded rare natural mineral that has unique filtration properties. Typically, water gets filtered down to 5 micron nominal.
After a pre-set amount of time, the system automatically undergoes a backwash cycle wherein all the trapped dirt/sediment goes to drain and the system is ready for use again. There are no replacement filters in this system and is virtually maintenance free.
Weight | 74389 g |
---|---|
Dimensions | 19 × 19 × 76 in |
Reviews
There are no reviews yet.